Spark Plug, Denso GI3-3

Equivalent: CAT 194-8518, CAT 301-6663, CAT 146-2588, CUM 4010981, CUM 4098162, CUM 2866879, WAU 60999Z, WAU 69919D, CAT 224-2700, CAT 243-4291, CAT 479-7702, CAT 149-9931, CUM 4924504, GUA 76.64.292, SIE 7664761,

In Stock

FREE Shipping on orders over $2000

Description

Denso 6116 GI3-3 Industrial Spark Plug

Description:

The Denso GI3-3 6116 Iridium Saver spark plug is constructed with the most modern ceramics that have a finer-grain and are possess molded-in higher pressure. The higher density of the GI3-3's ceramics helps to prevent the insulator from electrical breakdown.

The Denso GI3-3 industrial spark plug also has better corrosion resistance thanks to special nickel plating.

Incorporated into this industrial spark plug are four small electrodes. These electrodes create a cross groove for improved sparking performance. innovation also suppresses voltage dispersion which provides for a reduction in required voltage.

The wear resistance of the spark plug is improved thanks to the high welding point of Denso's iridium alloy.

The most taxing engine conditions are reliably handled by the spark plug. The GI3-3 is manufactured with 360° laser welding that creates an incredibly tight seal. This seal prevents premature spark plug wear.

The ignitability of these Denso spark plugs is resilient thanks to the 0.7mm center electrode.

For applications where high reliability and the ability to endure high combustion pressures are required, these Denso iridium spark plugs are a clear choice. Denso incorporates a stress-resistant monolithic resistor which helps to eliminate high-energy coil interference and noise in electronic equipment.

The Denso GI3-3 industrial spark plug is extremely effective in bio-gas engines and offers world-class durability and performance thanks to the double iridium electrodes.

Spark Plug Spec:

Thread: 18 mm x 1.5 mm

Gap: 0.28 mm

Hex: 22 mm

Reach: 20.6 mm

Seat Type: Gasket

Torque: Cast Iron

Material: Iridium

Sold as:

Priced individually, sold in a box of 4

Cross Reference:

Caterpillar: 194-8518, 224-2700, 243-4291, 301-6663

Denso: GI3-1, GI3-5

Cummins: 4010981, 4098162, 2866879

Altronic: L1863B, L1863IP

Waukesha: 60999Z, 69919D

Bosch: 7302, 7305, 7306

Gateway: 1175112, 1177512, 1176112

Champion: RB77CC, RB77N, KB75N, RB75N, RB77WPC, RB77WPCC, KB77WPCC, RB76N/RB76N, RB76PP

Beru: Super Green Spark Plug, 18GZ 4-77, 18GZ 6-77, 18G Z20, 18GZ 6-77-2, 18GZ 7, RB76N, RB76PP, RB75N, RB75PP

Engine Application:

Caterpillar: G3500 Series (except C and E series with prechamber plugs), G3600 Series.

Waukesha: AT Series (8L-AT25GL / AT27GL (13/16" Reach Heads), L5794GSI, L5794LT, L7044G (VHP Series V-12), L7044GL (VHP Series V-12), L7044GSI VHP Series V-12), F3524GSI, H24GL, L36GL, L36GSI), VGF Series, VHP Series ( F18G, F18GL / GLD, H24G, H24GL / GLD, L36GL / GLD, P48GL GLD, 2895GL (13/16" Reach Heads), 3521GL (13/16" Reach Heads), L5108GL (13/16" Reach Heads), L5790GL (13/16" Reach Heads), L7042GL (13/16" Reach Heads), P5115GL, P9390GL (13/16" Reach Heads)).

Cummins: Q19G, QSV 81, QSV 91, QSK 19G, QSK 38G, QSK 45G, QSK 50G, QSK 60G

Guascor: FG180, FGLD180, FG240, FGLD 240, FGLD360, FGLD480, FGLD560.

Jenbacher: J600 Series (J612, J616, J620)

Perkins: 4000 Series.

Superior: 1706G2, 1712G1, 2400 G Series

Wartsila: W25SG, W28SG, W34SG, W20V, 34SG.