KLUBERQUIET BQ 72-72, 400 GRAM CARTRIDGE, Kluber Lubrication 094008 0591 Equivalent: JEN 364609, JEN 346609, Available FREE Shipping on orders over $2000 Login for price Description KLU 094008 0591, KLUBERQUIET BQ 72-72, 400 GRAM CARTRIDGE. BQ 72-72 is the newer version of GHY 72.Low-noise rolling bearing grease for long-term lubricationKlüberquiet BQ 72-72 is made up of an ester oil, a polyurea thickener and special additives. These components have been combined such that Klüberquiet BQ 72-72 offers many advantages for the lubrication of rolling bearings:– extremely low-noise operation shown on special test rigs, e.g. SKF BeQuiet+– long bearing life due to optimised wear protection and a thermally stable, synthetic grease– good compatibility with elastomers (data available on request)– wide service temperature range and good low-temperature performanceProduct Data:Article number: 094008Chemical composition, thickener: polyureaChemical composition, type of oil: ester oilLower service temperature: -45 °C / -49 °FUpper service temperature: 180 °C / 356 °FColour space: beigeTexture: homogeneousTexture: short-fibredDensity at 20 °C: approx. 0.96 g/cm3Worked penetration, DIN ISO 2137, 25 °C, lower limit value: 250 x 0.1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value: 280 x 0.1 mmSpeed factor (n x dm): 1 000 000 mm/minKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C: approx. 80 mm2/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C: approx. 9.5 mm2/sCorrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: <= 1 corrosion degree1 week, distilled waterDrop point, DIN ISO 2176, IP 396: >= 250 °CFlow pressure of lubricating greases, DIN 51805, test temperature:-45 °C: <= 1 400 mbarNoise test run, SKF BeQuiet+, noise classes: >= GN3Testing of lubricating greases on FAG FE9 rolling bearing tester, DIN 51821 pt. 02, >= 100 hspeed: 6000 min-1, axial load: 1500 N, temperature: 180 °C, service life F50:SKF-ROF rolling bearing tester, axial load: 100 N, radial load: 50 N, speed: 10000 min-1, >= 1 000 htemperature:170 °C, service life F50:Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating: 0 - 90Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the 36 monthsunopened original container, approx.ApplicationKlüberquiet BQ 72-72 is suitable for bearings where long service life is required in combination with especially low-noise operation. Such applications include rolling bearings in electric motors, fans, air conditioners, generators and belt tighteners in cars, electric household appliances and office equipment. The product should therefore primarily be used for the long-term or for-life lubrication of capped or sealed bearings.The low-noise characteristics of this rolling bearing grease have been confirmed in various tests performed on special noise test rigs. Tests according to the SKF-BeQuiet+ method showed that Klüberquiet BQ 72-72 can be classified as noise class GN 3.Grease service life tests were conducted on SKF-ROF and FAG-FE9 rolling bearing testers according to DIN 51 821. The results showed long service lives at high temperatures (see product data).