Spark Plug, Denso GE3-1

Denso GE3-1 Description:

The Denso GE3-1 6080 Iridium Saver spark plug is constructed with the most modern ceramics that have a finer grain and are possess molded-in higher pressure. The higher density of the GE3-1's ceramics helps to prevent the insulator from electrical breakdown.

These Denso Iridium spark plugs also have better corrosion resistance thanks to special nickel plating.

Incorporated into this industrial spark plug are four small electrodes. These electrodes create a cross groove for improved sparking performance. innovation also suppresses voltage dispersion which provides for a reduction in required voltage.

The wear resistance of the spark plug is improved thanks to the high welding point of Denso's iridium alloy.

The most taxing engine conditions are reliably handled by the spark plug. The GE3-1 is manufactured with 360° laser welding that creates an incredibly tight seal. This seal prevents premature spark plug wear.

The ignitability of the Denso GE3-1 is resilient thanks to the 0.7mm center electrode.

For applications where high reliability and the ability to endure high combustion pressures are required, the Denso 6080 GE3-1 is a clear choice. Denso incorporates a stress-resistant monolithic resistor which helps to eliminate high-energy coil interference and noise in electronic equipment.

The Denso GE3-1 industrial spark plug is extremely effective in bio-gas engines and offers world-class durability and performance thanks to the double iridium electrodes.

EChoiceParts is proud to offer the Denso 6080 GE3-1 industrial spark plug at a highly competitive price. Each member of our team of industrial energy experts is available to you for consultations, to answer questions, and to help make sure you get the right part for your industrial application.

Denso GE3-1 (6080) Spark Plug Spec:

Shell

1. Thread Diameter: 14mm
2. Thread Pitch: 1.25mm
3. Seat Type: Gasket
4. Reach: 19mm (3/4")
5. Hex Size: 13/16" (21mm)
6. Terminal Type: Solid
7. Gap: .012" (0.3mm)

Center Electrode

1. Material: Iridium
2. Type: Fine Wire
3. Size: 1.3mm
4. Projection: Projected

Ground Electrode

1. Material: Platinum
2. Type: Standard
3. Quantity: 1

Specifications

1. Resistor: Yes
2. Torque Specs: Cast Iron: 22 lb. ft. (15 lb. ft. w/ lubricant)

Part Information

1. Brand: Denso

Sold as:

Priced individually, sold in a box of 4, or a large box of 96 pcs.

Denso 6080 GE3-1 Cross Reference:



Caterpillar: 104-3170, 4W-2256, 128-6238, 2N-2839

Denso: GE3-5A

Cummins: 4090121

Altronic: J1463DP

Bosch: 7311, 7315

Gateway: 8179215

Champion: RN79G, RN79G1

Champion Premium: RN79PYP17, RN79PYP25

STITT: R407XL

Beru: Z102, Z147, Z163

MAN: 51.25923.0050, 51.25923.0046

Engine Application:

Ariel: JGS-1 High Tension, JGS-1 Low Tension

Arrows: VRG220, VRG330

Caterpillar: G3400 Series

Chrysler: Thru 1974 H225, HB-225, HB361, HB383, HC361, HT361, HB413, HC413, HB170,

HT413, HB426, HC426, H170, IND53, IND56, IND56A, IND56, IND56A, LH318, H170, HB170, H225, HB225, HB361, HB383, HC361, HT361, HB413, HC413, HT413, HB426, HC426

Cummins: No. 173416 5/8" Reach w/N677 Gasket (w/ special adapter), No. 90210035,

90210036 3/4" Reach

Dorman: 3DAG, 4DAG, 6DAG, 6QG, D ATG4, 6, 6SEG, 8SEG, 12SEG, 6SETCWG MinNox

Ford: 158, 175, 201, 256 cid

GM: 305, 351, 401, 478, 702, CNG, Gasoline, 305, 351, 401, 478, 702 LPG, CNG

International: C-537, C-605

John Deere: 300 Series

J-W Power: Superburn Pre-Cell

Liebherr: G 924 T, G 924 TC, G 926 T, G 926 TC, G 926 TC 40

MAN: E 0824 E 301, E 0824 E 302, E 0826 E301, E 0826 E302, E 2842, E 2842 LE, E 2843 LN, E 2876, E 2866 LUH01

Volvo Truck: GH10C, MG9

Waukesha: H1077G, H1077GSI, L1616G, L1616GSI, VRG220, VRG330, VRN265, VRN283, VRN310, F11G, F11GSI / CSID, P2154G, P2154GSI, H1077G, H1077GSI, L1616G, L1616GSI

Wisconsin: W2-1230 Serial #5996538 & Up, W2-1235, W4-2460, W2-1250