Kluber ISOFLEX LDS 18 Special A Long-term lubricating grease 45g, Kluber Lubrication 0040130285
In Stock 200+. Additional units to ship in: 21 days.
Kluber ISOFLEX LDS 18 Special A Dynamically light, long-term lubricating grease, 45g, Kluber Lubrication PN: 0040130285
Benefits:
- Long service life due to good corrosion protection as well as ageing and oxidation stability, hence cost savings.
- Tried-and-tested for many years, especially at high speeds and low temperatures.
- Low heating-up of bearings due to low lubricant friction leading to longer service lives.
The Solution:
SOFLEX LDS 18 SPECIAL A is a dynamically light long-term grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. The product is resistant to ageing, oxidation and water, and it protects reliably against corrosion.
Application:
ISOFLEX LDS 18 SPECIAL A is suitable for plain and rolling bearings operating at low temperatures and/or high speeds, for example in grinding spindles, machine tool spindles, spindle bearings, textile spindles, bearings in OE-spinning turbines, bearings in precision and optical equipment.
Application Notes:
The lubricant is applied by brush, spatula, grease gun or grease cartridge. Owing to the different compositions of elastomers and plastic materials, compatibility tests are indispensable before series application.
More Information:
| Characteristics | Item Info |
| Composition, thickener | Lithium soap |
| Composition, type of oil | ester oil, mineral oil |
| Color space | Yellow |
| Texture | homogeneous, short fibrous |
| Service temperature, lower limit | -50 °C |
| Service temperature, upper limit | 120 °C |
| Density, Klüber method: PN 024, 20°C | approx. 0.88 g/cm³ |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit | 265.0.1 mm |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit | 295.0.1 mm |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit | 2000 mPas |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit | 4000 mPas |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C | approx. 3.5 mm²/s |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C | approx. 15 mm²/s |
| SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h | 0 corrosion degree |
| Low temperature torque, IP 186, -60°C, running torque | ≤ 100 mNm |
| Low temperature torque, IP 186, -60°C, starting torque | ≤ 1000 mNm |
| Dropping point, DIN ISO 2176 / IP 396 | ≥ 190 °C |
| Speed factor (n x dm) | approx. 1000000 mm/min |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 36 months |