Kluber ISOFLEX SUPER LDS 18 High-speed grease 370g, Kluber Lubrication 0040240590
In Stock 17. Additional units to ship in: 21 days.
Kluber ISOFLEX SUPER LDS 18 High-speed and smooth-running grease 370g, Kluber Lubrication PN: 0040240590
Benefits:
- Low running torque enables energy savings, particularly at low temperatures.
- Smooth-running grease for high performance.
- Long service life due to good corrosion protection and ageing stability, hence cost savings possible.
- Low heating-up of bearings due to low lubricant friction leading to longer service lives.
The solution:
ISOFLEX SUPER LDS 18 is a low-noise, high-speed grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. It protects against corrosion and is resistant to aging and oxidation.
Application:
ISOFLEX SUPER LDS 18 is suitable for plain and rolling bearings, small, miniature and precision bearings, for precision mechanical and optical equipment and low-temperature applications. It can also be used as an anti-corrosion and anti-wear lubricant in electrical contacts. Properly applied, ISOFLEX SUPER LDS 18 protects against corrosion, improves sliding properties and reduces wear, e.g. in sliding contacts and potentiometers.
Application Notes:
The lubricant is applied by brush, spatula, or grease gun. Owing to the different compositions of elastomers and plastic materials, compatibility tests are indispensable before series application.
More Information:
| Characteristics | Item Info |
| Composition, thickener | Lithium soap |
| Composition, type of oil | ester oil, mineral oil |
| Color space | Yellow |
| Texture | homogeneous, short fibrous |
| Density, Klüber method: PN 024, 20°C | approx. 0.9 g/cm³ |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit | 265.0.1 mm |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit | 295.0.1 mm |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C | approx. 3.5 mm²/s |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C | approx. 15.5 mm²/s |
| SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h | 0 corrosion degree |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 36 months |
| Service temperature, lower limit | -50 °C |
| Service temperature, upper limit | 120 °C |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit | 2000 mPas |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit | 3400 mPas |
| Flow pressure, DIN 51805-2, -50°C | ≤ 1400 mbar |
| Dropping point, DIN ISO 2176 / IP 396 | ≥ 190 °C |
| Speed factor (n x dm) | 1000000 mm/min |