Kluber STABURAGS NBU 12/300 KP Long-term grease 400g, Kluber Lubrication 0170620591
Available from factory - Estimated to ship in: 21 days.
Kluber STABURAGS NBU 12/300 KP Long-term grease 400g, Kluber Lubrication PN: 0170620591
The Benefits
- Rolling and plain bearing grease
- Good corrosion protection
- Good pressure absorption
- Resistant to water Long-term grease
- Reliable wear protection
The Solution
STABURAGS NBU 12/300 KP is a rolling and plain bearing grease based on mineral oil and a barium complex soap thickener. It offers good wear protection and good pressure absorption. STABURAGS NBU 12/300 KP is resistant to water and protects reliably against corrosion.
Application
STABURAGS NBU 12/300 KP is a rolling bearing grease for longterm and lifetime lubrication of drafting equipment in spinning machines (upper and lower rollers), tension and eccentric rollers, cardan shafts and rolling bearings in fans and ventilation systems.
Application notes
The product is easily applied by brush, spatula or conventional metering systems. This product is also available in our automatic lubricant dispenser Klübermatic. Please consult the application engineering experts from Klüber Lubrication to determine whether Klübermatic might be used under the conditions in your processes.
More Information
| Characteristics | Item Info |
| Article number | 017062 |
| Composition, thickener | barium complex soap |
| Composition, type of oil | mineral oil |
| Colour space | brown |
| Service temperature, lower limit | -20 °C |
| Service temperature, upper limit | 130 °C |
| Density, Klüber method: PN 024, 20°C | approx. 0.97 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 285 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 315 x 0.1 mm |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit | 5000 mPas |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit | 9000 mPas |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 /ASTM D445 / ASTM D7042, 100°C | approx. 18 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 220 mm²/s |
| Flow pressure, DIN 51805-2, -35°C | ≤ 450 mbar |
| Dropping point, DIN ISO 2176 / IP 396 | ≥ 220 °C |
| Speed factor (n x dm) | approx. 350000 mm/min |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 60 months |