Klubersynth UH1 64-62 Synthetic Lubricating Grease, 1kg, Kluber Lubrication 0960460037
Available from factory - Estimated to ship in: 21 days.
Klubersynth UH1 64-62 Synthetic lubricating grease suitable for use in the food-processing and pharmaceutical industries, 1kg, Kluber Lubrication PN: 0960460037
Benefits: Less maintenance due to good resistance to low and high temperatures, synthetic base oil for extended relubrication intervals and
good resistance to water; ISO 21469 certified - supports the compliance with the hygienic requirements in your production.
The Solution: Klübersynth UH1 64-62 shows a good low- and high-temperature behaviour, and good resistance to water, corrosion, ageing and oxidation. Klübersynth UH1 64-62 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 64-62 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.
Application: Klübersynth UH1 64-62 is suitable for lubrication points in machines and installations used in the food-processing and pharmaceutical industries, particularly for all points where contact between the lubricant and the food product cannot be excluded. We recommend lubricating all friction points with Klübersynth UH1 64-62 in order to avoid negative effects caused by lubricant spreading.
Application Notes: Klübersynth UH1 64-62 is applied by brush, spatula, grease gun or grease cartridge. Before using Klübersynth UH1 64-62 to replace other greases, the bearings should be cleaned thoroughly. Grease exchange by relubrication is sufficient if the greases are miscible.
More Information:
| Characteristics | Item Info |
| Composition, thickener | Silicate |
| Composition, type of oil | ester oil , synthetic hydrocarbon oil |
| Color space | Beige |
| NSF H1 registration number | 136871 |
| Texture | homogeneous |
| Density, Klüber method: PN 024, 20°C | approx. 0.93 g/cm³ |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit | 265. 0.1 mm |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit | 295. 0.1 mm |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C | approx. 10 mm²/s |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C | approx. 65 mm²/s |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹ | approx. 3000 mPas |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 24 months |
| Service temperature, lower limit | -40 °C |
| Service temperature, upper limit | 140 °C |
| Flow pressure, DIN 51805-2, -40°C | ≤ 1400 mbar |
| Dropping point, DIN ISO 2176 / IP 396 | ≥ 250 °C |
| Speed factor (n x dm) | approx. 500000 mm/min |