Kluber ISOFLEX TOPAS L 32 N Special low-temperature grease 5 KG, Kluber Lubrication PN: 0042270164
Your Benefits
- Low breakaway torque even at very low temperatures in small gears and actuators.
- Reduced wear due to reliable lubricating film over a wide service temperature range enabling longer component life.
- For-life lubrication enabled by strong corrosion protection, oxidation and ageing resistance.
Our Solution
As a manufacturer of automotive components, you are dealing with customers asking for reliable component function over a long service life and in particular at low temperatures. By selecting an appropriate lubricant, you can meet all these ever more demanding requirements in the market. With ISOFLEX TOPAS L 32 and L 32 N, we offer you two lubricants that have both been designed for particularly low temperatures.
ISOFLEX TOPAS L 32 and L 32 N are based on a synthetic hydrocarbon oil and a lithium soap. The corrosion protection properties of these oils are good as is their ageing and oxidation stability.
The additional UV indicator contained in ISOFLEX TOPAS L 32 N enables reliable quality control upon application, even with minimum quantities. This will increase the reliability of your production process.
Application
You may use ISOFLEX TOPAS L 32 and L 32 N especially for the lubrication of small gears as can be found in electric actuators in vehicles (e.g. in window lifters, sun roofs, seat adjustments, headlights and ventilation flaps).
ISOFLEX TOPAS L 32 and L 32 N have been successfully used in the automotive industry for many years and are specified and approved by most automobile makers and their suppliers worldwide.
Further fields of application are:
- Slideways, bowden wires, door locks.
- Rolling bearings in small motors, fans, pumps.
- Gear flanks in plastic/plastic gearboxes (e.g. POM, PA or PBT) and for plastic/steel material pairings.
For applications in the car interior (e.g. ventilation flaps) with special requirements regarding neutrality in odour acc. to VDA 270, Klübersynth LMI 44-42 may be used as an alternative.
Application notes
You can apply ISOFLEX TOPAS L 32 and L 32 N by spatula, brush, grease gun or grease cartridge.
More Information
| Characteristics | Item Info |
| Article number | 004227 |
| Composition, thickener | lithium soap |
| Composition, type of oil | synthetic hydrocarbon oil |
| Colour space | beige |
| Texture | homogeneous , short fibrous |
| Service temperature, lower limit | -60 °C |
| Service temperature, upper limit | 130 °C |
| Density, Klüber method: PN 024, 20°C | approx. 0.86 g/cm³ |
| NLGI grade, DIN 51818 | 2 |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 265 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 295 x 0.1 mm |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit | 2000 mPas |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit | 5000 mPas |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 /ASTM D445 / ASTM D7042, 100°C | approx. 3.8 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 46 mm²/s |
| SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h | ≤ 1 corrosion degree |
| Flow pressure, DIN 51805-2, -35°C | ≤ 450 mbar |
| Dropping point, DIN ISO 2176 / IP 396 | ≥ 185 °C |
| Speed factor (n x dm) | 1000000 mm/min |
| Water resistance, DIN 51807-1, 3 h, 90°C | ≤ 1 - 90 rating |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 36 months |
