Kluber STABURAGS NBU 12 Bearing Grease, 50g, Kluber Lubrication 0170520221
Available from factory - Estimated to ship in: 21 days.
Kluber STABURAGS NBU 12 Bearing grease, 50g, Kluber Lubrication PN: 0170520221
Benefits:
- Good corrosion protection.
- Good resistance to ambient media.
- Excellent wear protection.
- Good resistance to tribo-corrosion.
- Good load-carrying capacity.
- Good sealing effect.
Solution:
STABURAGS NBU 12 are lubricating greases based on mineral oil and barium complex soap. These products are resistant to very high specific surface pressure, thus ensuring good wear protection. In addition, they are resistant to corrosion, water and many diluted alkaline and acid solutions.
Application:
STABURAGS NBU 12 is efficient on medium-speed rolling bearings subject to humidity or ambient media. It is used on water pumps, wheel bearings and motors; and in the textile industry, on all wet processing equipment such as washing, mercerising and dyeing machines.
Application Notes:
These greases are applied by brush, spatula or conventional metering systems. STABURAGS NBU 12 is also available in our automatic lubricant dispenser Klübermatic. Please consult the application engineering experts from Klüber Lubrication to determine whether Klübermatic might be used under the conditions in your processes.
More Information:
| Characteristics | Item Info |
| Composition, thickener | Barium complex soap |
| Composition, type of oil | mineral oil |
| Color space | Brown |
| Service temperature, lower limit | -15 °C |
| Service temperature, upper limit | 130 °C |
| Density, Klüber method: PN 024, 20°C | approx. 0.99 g/cm³ |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit | 245.0.1 mm |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit | 275.0.1 mm |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit | 9000 mPas |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit | 15000 mPas |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C | approx. 19 mm²/s |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C | approx. 220 mm²/s |
| SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h | ≤ 1 corrosion degree |
| Dropping point, DIN ISO 2176 / IP 396 | ≥ 220 °C |
| Flow pressure, DIN 51805-2, -35°C | ≤ 1600 mbar |
| Four-ball tester, welding load, DIN 51350-4 | ≥ 3000 N |
| Speed factor (n x dm) | approx. 350000 mm/min |
| Water resistance, DIN 51807-1, 3 h, 90°C | ≤ 1 - 90 rating |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 60 months |
