Energy Choice Logo
Kluber Staburags NBU 8 EP, Cartridge FLEX 125ml, Kluber Lubrication, 0171050920

Kluber Staburags NBU 8 EP, Cartridge FLEX 125ml, Kluber Lubrication 0171050920

$113.46
Sign In for your price

Available from factory - Estimated to ship in: 21 days.

Kluber Staburags NBU 8 EP, Cartridge FLEX 125ml, Kluber Lubrication PN: 0171050920


Rolling bearing and high-pressure grease

  1. STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener.
  2. STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water. It meets the requirements of DIN 51 807, dated May 1970: SKF-R2F test, test run B, 140 °C, and it achieves about 4000 operating hours in the SKF-ROF test at 120 °C.



Benefits:

  1. Good corrosion protection
  2. Good resistance to ambient media
  3. Good wear protection / EP properties
  4. Protects against tribo-corrosion
  5. High-pressure grease



Application:

  1. STABURAGS NBU 8 EP has proven efficient as a rolling bearing and high pressure grease protecting against wear.
  2. It is used in traction motors, journal bearings, electric motors, pumps, and tapered roller bearings.



Application notes:

  1. The product is applied by brush, spatula or conventional metering systems.



Product data:

NLGI grade, DIN 518182
NSF-H2 registration135 684
Chemical composition, type of oilmineral oil
Chemical composition, thickenerbarium complex soap
Lower service temperature-20 °C / -4 °F
Upper service temperature140 °C / 284 °F
Color spacebrown
Density at 20 °Capprox. 0.99 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value265 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value295 x 0.1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 97 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 11.5 mm²/s
Speed factor (n x dm)approx. 500 000 mm/min
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value5500 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value9500 mPas
Drop point, DIN ISO 2176>= 220 °C
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.60 months


Recently Viewed Items