Kluber AMBLYGON TA 15/2 Special grease for long term lubrication 400g, Kluber Lubrication 0201090591
$233.2
Sign In for your priceIn Stock 81. Additional units to ship in: 21 days.
Kluber AMBLYGON TA 15/2 Special grease for long term lubrication 400g, Kluber Lubrication PN: 0201090591
Special grease for long-term lubrication and high temperatures
- AMBLYGON TA 15/2 is a longterm and hightemperature lubricating grease based on mineral oil and polyurea. This lubricating grease is used for longterm or lifetime lubrication in the machinebuilding sector covering a wide service temperature range up to 150 °C. AMBLYGON TA 15/2 offers good adhesion, resistance to hot and cold water and diluted alkaline and acid solutions.AMBLYGON TA 15/2 is resistant to oxidation and ageing and protects against corrosion.
Benefits for your application:
- Versatile grease for many applications subject to high loads
- Long service life even when exposed to high temperatures or aggressive media
- Long service life due to the high resistance to water and water vapour
- Long service life due to the excellent adhesion to the friction points
- Improved sealing effect due to high adhesion
- Low maintenance due to good corrosion protection
Application:
- AMBLYGON TA 15/2 lubricates bearings and joints subject to high temperatures and loads, for example in:
-Conveyors
-Kilns (rotary tubular kilns)
-Water pumps
-Hot rollers
-Tarmac laying machines
-Gate valves
-Seals
-Washing machines and dishwashers
-Impact mechanism in power tools
-Joints, hinges
-King pins
- AMBLYGON TA 15/2 is also used in combination with mineraloilresistant elastomer seals.
Application notes:
- Prior to series application we recommend checking compatibility with elastomers, if possible in the component under conditions similar to actual use.
Product data:
| Article number | 020109 |
| Chemical composition, thickener | polyurea |
| Chemical composition, type of oil | mineral oil |
| Lower service temperature | -20°C / -4°F |
| Upper service temperature | 150 °C / 302 °F |
| Density at 20 °C | approx. 0.93 g/cm³ |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 220 mm²/s |
| Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 18 mm²/s |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 285 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 315 x 0.1 mm |
| Speed factor (n x dm) | approx. 350 000 mm/min |
| Flow pressure of lubricating greases, DIN 51805, test temperature: -20°C | <= 1 400 mbar |
| Oil separation, DIN 51817 N, after 7 d/40 °C | <= 5 % by weight |
| Drop point, DIN ISO 2176 | >= 220 °C |
| Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water | <= 1 corrosion degree |
| Water resistance, DIN 51807 pt. 01, 3h/90 °C, rating | 0 - 90 |
| Minimum shelf life from the date of manufacture in a dry, frostfree place and in the unopened original container, approx. | 60 months |