Kluberplex BEM 41-132 High-temperature and long-term grease 370g, Kluber Lubrication 0202560591
$36.73
Sign In for your priceIn Stock 59. Additional units to ship in: 21 days.
Kluberplex BEM 41-132 High-temperature and long-term grease 400g, Kluber Lubrication PN: 0202560591
Klüberplex BEM 41-132 is based on synthetic hydrocarbon oil, mineral oil and a special lithium soap. Special additives ensure optimum oxidation resistance as well as protection against wear and corrosion.
Benefits for your application
- Longer service life due to special wear additives for roller bearings
- Less maintenance
- Versatile grease due to wide operating temperature range and optimised oil release
Application
- Klüberplex BEM 41-132 can be used for long-term or lifetime lubrication of rolling bearings at operating temperatures between 70 and 110 °C.
- For rolling bearings with a high degree of sliding friction, e.g. tapered roller bearings, cylinder roller bearings, spherical roller bearings
- For-life lubricated deep groove ball bearings and rolling bearings e.g. in paper-making machines (dry section), textile machines (dry section), electric motors, hot air blowers drying ovens, air separators in the base materials industry, generators in wind power plants
- Rolling bearings in vehicle components
- Clutch bearings
- Generator bearings
- Water pump bearings
- Fluid fan bearings
Technical specifications
| Lubricating greases -K, DIN 51825 in connection with DIN 51502 | KPHC2N-30L |
| Chemical composition, thickener | special lithium soap |
| Chemical composition, type of oil | synthetic hydrocarbon oil |
| Chemical composition, type of oil | mineral oil |
| Lower service temperature | -40 °C / -40 °F |
| Upper service temperature | 150 °C / 302 °F |
| Color space | yellow |
| Density at 20 °C | approx. 0.90 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 265 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 295 x 0.1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 120 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 14 mm²/s |
| Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water | <= 1 corrosion degree |
| Drop point, DIN ISO 2176, IP 396 | >= 250 °C |
| Speed factor (n x dm) | approx. 1 000 000 mm/min |
| Oil separation, DIN 51817 N, after 7 d/40 °C | <= 4 % by weight |
| Testing of lubricating greases on FAG FE9 rolling bearing tester, DIN 51821 pt. 02, speed: 6000 min-1, axial load: 1500 N, temperature: 150 °C, service life F50: | >= 100 h |
| Low-temperature torque, IP 186, -40 °C, start | <= 1 000 mNm |
| Low-temperature torque, IP 186, -40 °C, running | <= 200 mNm |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 36 months |