Klubersynth GE 46-1200 Synthetic long-term fluid grease 400g cartridge, Kluber Lubrication 0270350591

Klubersynth GE 46-1200 Synthetic long-term fluid grease 400g cartridge, Kluber Lubrication PN: 0270350591

Klubersynth GE 46-1200 Synthetic long-term fluid grease with excellent anticorrosive effect

Small gear systems demand high efficiency and a lubricant with a wide temperature range along with a long service life.

Our fully synthetic long-term fluid gear grease Klübersynth GE 46-1200 based on a polyglycol base oil and a lithium soap thickener was especially developed to meet the tough requirements of advanced small gears.

The combination of base oil and additives offers optimised wear protection under mixed friction and good pressure absorption capacity in the lubrication of gears.

Klübersynth GE 46-1200 also offers excellent corrosion protection and good compatibility with sealing elastomers.

Volume: Cartridge 400g

Also available in: Can 1 kg, Bucket 25 kg, Drum 180 kg

Benefits for your application

1. Reliable lubricant film formation in a wide service temperature range.
2. Good wear protection and high pressure absorption capacity.
3. Optimised friction behaviour leading to higher efficiency.
4. Good seal life due to excellent compatibility.
5. Excellent backflow to the friction point.
6. Excellent ageing and oxidation resistance for long service life

Application

We developed Klübersynth GE 46-1200 on the basis of our long experience in the lubrication of spur, bevel and worm gears.

Especially for steel/steel combinations, for example in small and miniature gears, gear motors and power tool gears, Klübersynth GE 46-1200 offers outstanding performance characteristics.

Application notes

Medium peripheral speeds of 4-5 m/s can be effectively handled by this grease. It also provides vibration and noise damping. Klübersynth GE 46-1200 can also be used to optimise the lubrication of ball and roller guides, plain and rolling bearings, and toothed couplings from – 30 to 120 °C.

Product data:

1. NLGI grade, DIN 51818: 00
2. Color space: brown
3. Texture: homogeneous
4. Density at 20 °C: approx. 0.99 g/cm³
5. Worked penetration, DIN ISO 2137, 25 °C, lower limit value: 400 x 0.1 mm
6. Worked penetration, DIN ISO 2137, 25 °C, upper limit value: 430 x 0.1 mm
7. Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C: approx. 120 mm²/s
8. Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C: approx. 20 mm²/s
9. Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer: <= 2 000 mPas
10. Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C: 1 - 100 corrosion degree
11. FZG scuffing test, DIN ISO 14635-1, A/8.3/90, change in weight: < 0.2 mg/kWh
12. FZG scuffing test, DIN ISO 14635-1, A/8.3/90, scuffing load stage: > 12
13. Drop point, DIN ISO 2176, IP 396: >= 160 °C
14. Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.: 24 months