KLUBERQUIET BQ 72-72, 400g, Kluber Lubrication 0940080591

KLUBERQUIET BQ 72-72, 400g, CARTRIDGE. BQ 72-72 is the newer version of GHY 72.

Equivalent OE part numbers:

MWM 12216335

Jenbacher 364609

The Benefits

1. Long-term operation due to optimised wear protection and smooth running.
2. Wide service temperature range allows a variety of applications.
3. Cost savings due to long service life of grease.
4. Particularly suitable for lifetime-lubricated capped or sealed deep groove ball bearings

The Solution

Klüberquiet BQ 72-72 is made up of an ester oil, a polyurea thickener and special additives. These components have been combined such that Klüberquiet BQ 72-72 offers many advantages for the lubrication of rolling bearings: extremely low-noise operation shown on special test rigs, e.g. SKF BeQuiet+; Long bearing life due to optimised wear protection and a thermally stable, synthetic grease good compatibility with elastomers (data available on request); Wide service temperature range and good low-temperature performance.

Application

Klüberquiet BQ 72-72 is suitable for bearings where long service life is required in combination with especially low-noise operation. Such applications include rolling bearings in electric motors, fans, air conditioners, generators, automotive belt tensioners, electric household appliances and office equipment. The product should therefore primarily be used for the long-term or for-life lubrication of capped or sealed bearings.

The low-noise characteristics of this rolling bearing grease have been confirmed in various tests performed on special noise test rigs. Tests according to the SKF-BeQuiet+ method showed that Klüberquiet BQ 72-72 can be classified as noise class GN 3. Grease service life tests were conducted on SKF-ROF and FAG-FE9 rolling bearing testers according to DIN 51 821. The results showed long service lives at high temperatures (see product data).

Application Notes

The lubricant is applied by means of a spatula, brush, grease gun or grease cartridge. We recommend completely removing preservatives before applying the grease. Preservatives for permanent use should be checked for purity and compatibility with Klüberquiet BQ 72-72. We can recommend compatible preservatives on request.

Product Data

1. Article number: 094008
2. Chemical composition, thickener: polyurea
3. Chemical composition, type of oil: ester oil
4. Lower service temperature: -45 °C / -49 °F
5. Upper service temperature: 180 °C / 356 °F
6. Colour space: beige
7. Texture: homogeneous, short-fibred
8. Density at 20 °C: approx. 0.96 g/cm3
9. Worked penetration, DIN ISO 2137, 25 °C, lower limit value: 250 x 0.1 mm
10. Worked penetration, DIN ISO 2137, 25 °C, upper limit value: 280 x 0.1 mm
11. Speed factor (n x dm): 1 000 000 mm/min
12. Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C: approx. 80 mm2/s
13. Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C: approx. 9.5 mm2/s
14. SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h: ≤ 1 corrosion degree
15. Drop point, DIN ISO 2176, IP 396: >= 250 °C
16. Flow pressure of lubricating greases, DIN 51805, test temperature:-45 °C: <= 1 400 mbar
17. FAG FE9 rolling bearing test, DIN 51821-2, 1500 / 6000-180, service life F50: ≥ 100 h
18. Water resistance, DIN 51807-1, 3 h, 90°C: 0 - 90 rating
19. Speed factor (n x dm): 1000000 mm/min
20. R0F rolling bearing test, Klüber method: axial load: 100 N / radial load: 50 N / 10000 min⁻¹ / 1.5 cm³, equipment: SKF grease testing maschine, 170°C, service life F50: ≥ 1000 h
21. Noise test, BeQuiet+, ÖNorm M 8127-2, equipment: SKF grease noise test rig, noise class: ≥ GN 3
22. Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx: 36 months

Components

Actual concentration is withheld as a trade secret