Klubersynth UH1 14-151, Cartridge NOVA 130ccm - 125mml, Kluber Lubrication 0960370920
Available from factory - Estimated to ship in: 21 days.
Klubersynth UH1 14-151, Cartridge NOVA 130ccm - 125mml, Kluber Lubrication PN: 0960370920
Benefits:
- Good corrosion protection reduces the risk of premature bearing failure.
- Good pumpability in centralized grease system prevents grease starvation.
- For a wide service temperature range due to the soft consistency of the grease.
- ISO 21469 certified - supports the compliance with the hygienic requirements in your production.
The Solution:
Klübersynth UH1 14-151 was especially developed for the food processing and pharmaceutical industry. Klübersynth UH1 14-151 shows good anti-wear properties, water resistance and corrosion protection as well as a high ageing and oxidation stability. Klübersynth UH1 14-151 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 14-151 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.
Application:
Used for machines and equipment in the food processing and pharmaceutical industry, particularly for lubrication points that may have incidental and technically unavoidable contact with the food product. However, we recommend using Klübersynth UH1 14-151 at all lubrication points, in order to avoid problems due to lubricant contamination. This special grease lubricates rolling and sliding bearings, lifting cylinders, joints, guide bars, cams, etc. Application notes Klübersynth UH1 14-151 is applied by brush, spatula, grease gun and grease cartridge or by means of centralized lubrication systems. Before substituting other greases with Klübersynth UH1 14-151 the bearings have to be cleaned and greased. If the greases are miscible, the grease can be exchanged by means of re-lubrication.
Application Notes:
Klübersynth UH1 14-151 is applied by brush, spatula, grease gun and grease cartridge or by means of centralized lubrication systems.
Before substituting other greases with Klübersynth UH1 14-151 the bearings have to be cleaned and greased. If the greases are miscible, the grease can be exchanged by means of re-lubrication.
More Information:
| Characteristics | Item Info |
| Composition, thickener | aluminium complex soap |
| Composition, type of oil | ester oil , synthetic hydrocarbon oil |
| Color space | Beige |
| Texture | fibrous , homogeneous |
| Density, Klüber method: PN 024, 20°C | approx. 0.89 g/cm³ |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit | 310.0.1 mm |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit | 340.0.1 mm |
| Kinematic viscosity of the base oil, 100°C, calculated data | approx. 22 mm²/s |
| Kinematic viscosity of the base oil, 40°C, calculated data | approx. 150 mm²/s |
| Flow pressure, DIN 51805-2, -45°C | ≤ 1400 mbar |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 24 months |
| Service temperature, lower limit | -45 °C |
| Service temperature, upper limit | 120 °C |
| NSF H1 registration number | 056354 |
| Dropping point, DIN ISO 2176 / IP 396 | ≥ 250 °C |
| Speed factor (n x dm) | approx. 500000 mm/min |